Silicone Heater Hoses
Silicone Hoses
 VAID ELASTOMER manufacturers a variety of silicone hoses/tubes with polyester or nylon or Aramid reinforcement according to
 customer's need and specifications. These hoses are not affected by anti-freeze liquids, are highly resistant to hardening
 with very good compression set resistance as well as ozone. These have a very long life hence reducing maintenance problems.
 Silicone formed Radiator and Heater Hoses
Silicone Heater Hoses
Surface Finish: Glossy Mirror Finish
Burst Pressure: 8 to 20 kg/cm 2 depends on the hose ID
Construction: 1 ply of Nylon 66, Polyester or Aramid
Working temperature ranges from -60°C to +200°C
Material and construction meets SAE J 20R4, Class A
 Straight Reducers
Silicone Hoses – Straight Reducers
Surface Finish: Glossy Mirror Finish
Burst Pressure: 10 to 20 kg/cm 2 depends on the hose ID
Construction: 3 ply Polyester Net
Working temperature ranges from -60°C to +180°C
Standard Wall Thickness: 4.2 mm
Material and construction meets SAE J 20R4, Class A. The same can be met according
to specific customer requirement.
 Reducer Elbows (45°/90°/135°) and special shapes
Silicone Hoses – Rubber Elbows
Surface Finish: Glossy Mirror Finish
Burst Pressure: 10 to 20 kg/cm 2 depends on the hose ID
Construction: 3 ply Polyester Net
Working temperature ranges from -60°C to +180°C
Standard Wall Thickness: 4.2 mm
Material and construction meets SAE J 20R4, Class A. The same can be met according
to specific customer requirement.
Back Next 
 

Automotive Rubber Hoses | EPDM Heater Hoses | Silicone Hoses | Charge Air Coolant Hoses
Marine Hoses | Rubber Mouldings | Rubber Air Intake Ducts | Rubber Bellows
Miscellaneous Rubber Gaskets and Bushings |Rubber Fuel Tubes | Rubber Extrusions

Home | About Us | Manufacturing Facilities | Contact Us | Sitemap